home > product details LCA10S model input voltage [v] output wattage [w] dc output [v/a] LCA10S-5 dc 110 - 170 ac 85 - 132 10 5v 2a LCA10S-5-h dc 110 - 170 ac 85 - 132 10 5v 2a LCA10S-12 dc 110 - 170 ac 85 - 132 10.8 12v 0.9a LCA10S-24 dc 110 - 170 ac 85 - 132 12 24v 0.5a LCA10S-15 dc 110 - 170 ac 85 - 132 10.5 15v 0.7a features small and compact pcb construction ul recognized, csa certified built-in inrush current protection rohs compliant safety agency approvals complies with den-an ul1950, csa c22.2 no.234 emi compliance fcc-b vcci-b 2 year warranty(refer to instruction manual)
model LCA10S-5 LCA10S-5-h LCA10S-12 LCA10S-15 LCA10S-24 max output wattage[w] 10 10 10.8 10.5 12 dc output 5v 2a 5v 2a 12v 0.9a 15v 0.7a 24v 0.5a specifications model LCA10S-5 LCA10S-5-h LCA10S-12 LCA10S-15 LCA10S-24 input voltage[v] ac85 - 132 1 f or dc110 - 170 current[a] acin 100v 0.3typ ( io=100% ) frequency[hz] 47 - 440 or dc efficiency[%] 71typ 71typ 75typ 75typ 78typ inrush current[a] acin 100v 25typ ( io=100% ) leakage current[ma] 0.5max ( 60hz , according to ul , csa and den-an ) output voltage[v] 5 5 121524 current[a] 22 ( peak 3 ) 0.9 0.7 0.5 line regulation[mv] 20max 20max 48max 60max 96max load regulation[mv] 40max 40max 100max 120max 150max ripple[mvp-p] 0to+50 c * 1 80max 80max 120max 120max 120max -10-0 c * 1 140max 140max 160max 160max 160max ripple noise[mvp-p] 0to+50 c * 1 120max 120max 150max 150max 150max -10-0 c * 1 160max 160max 180max 180max 180max temperature regulation[mv] 50max 50max 120max 150max 240max drift[mv] * 2 20max 20max 48max 60max 96max start-up time[ms] 100max ( acin 85v , io=100% ) hold-up time[ms] 10typ ( acin 85v , io=100% ) 20typ ( acin 100v , io=100% ) output voltage adjustment range[v] fixed ( "y"which can be adjusted the output is available as optional:5v -5 to +10% : 12 , 15 , 24v t 10% ) output voltage setting[v] 4.9 - 5.3 4.9 - 5.3 11.5 - 12.5 14.4 - 15.6 23.0 - 25.0 protection circuit and others overcurrent protection works over 105% of rating ( works over 105% of peak current at option -h ) and recovers automatically overvoltage protection works over 115% of rating , by zener diode clamping operating indication not provided remote sensing not provided remote on/off not provided isolation input-output ac2 , 000v 1minute , cutoff current = 10ma , dc500v 50m w min ( at room temperature ) input-fg ac2 , 000v 1minute , cutoff current = 10ma , dc500v 50m w min ( at room temperature ) output-fg ac500v 1minute , cutoff current = 100ma , dc500v 50m w min ( at room temperature ) environment operating temp. , humid.and altitude -10 to +60 c , 20 - 90%rh ( non condensing )( refer to derating curve ), 3 , 000m ( 10 , 000feet ) max storage temp. , humid.and altitude -20 to +75 c , 20 - 90%rh ( non condensing ), 9 , 000m ( 30 , 000feet ) max vibration 10 - 55hz , 19.6m/s 2 ( 2g ), 3minutes period , 60minutes each along x , y and z axis impact 196.1m/s 2 ( 20g ), 11ms , once each x , y and z axis safety and noise regulations agency approvals ul60950-1 , csa c22.2 no.234 complies with den-an conducted noise complies with fcc-b , vcci-b others case size/weight 49 x 17 x 94mm ( w x h x d ) / 65g max cooling method convection * 1 measured by 20mhz oscilloscope or ripple-noise meter(equivalent to keisoku-giken : rm101). * 2 drift is the change in dc output for an eight hour period after a half-hour warm-up at 25 c with the input voltage held constant at the rated input/output. * avoid prolonged use under over-load. LCA10S rugged pcb type lc a 10 s -5 - o ordering information 1 series name 2 100/120v input 3 output wattage 4 single output 5 output voltage 6 optional c :with coating g :low leakage current y :with potentiometer r 123456 lca e-60 recommended noise filter nac-06-472 high voltage pulse noise type : nap series low leakage current type : nam series * the noise filter is recommended * to connect with several devices.
? derating curve ? rise time & fall time (LCA10S-5) ? overcurrent characteristics (LCA10S-5) ? static characteristics (LCA10S-5) lca e-61 LCA10S external view performance data
|